Among the basic technical parameters of China Threads reducer manufacturers, the minimum diameter and length of the rotor are determined by the number of channels and the diameter of the pipeline, while the diameter of the pipeline is mainly determined by the thread of the outer pipe link when the work needs. At the same time, because the multi-channel joint can pass through various media, sometimes some parameters may be required to be proportional to each other.
Because the quantity of these new China hydraulic standard fittings wholesale is not very large, many of them are needed. To customize the design and production, so the price of a single number of high-pass spindle rotary joints is also called multi-channel rotary joints. What is the universal spindle rotary joint?
The structure of rotary joint is varied. According to different classification methods such as structure and application field, the rotary joint can also be classified according to the number of holes set up by working requirements, such as Hindley 2, 3, 4, 6, etc. Each inner tube can operate independently and without interference through the rotor. The medium transmission between the rotating structure and the rotating structure is accomplished by the cooperation of stator and stator. This kind of unrestricted continuous rotation also requires some basic parameters and sealing performance of the rotating joint. The basic technical parameters are mainly threaded size, pressure, temperature, pipe diameter size, maximum rotating speed and so on. China Threads reducer factory, leakage of liquid, wear resistance, corrosion resistance, etc. Higher, such as high speed 1000rpm, high temperature 400 degrees, high pressure 100MPa through corrosive medium, etc. These parameters determine the sealing, high temperature resistance, high speed, high pressure and multi-channel rotary joint. These parameters are very important.