CNC cross hole deburring for a tapped hole
Complete high-quality deburring on a tapped hole in a CNC machine. Use the spherical deburring cutter in combination with the custom-made tool path data.
Excellent deburring performance for M3-M24.
Burrs on a tapped hole
Easy and high-quality deburring
After drilling a prepared hole, run the preparation Path to suppresses burrs which are generated during tapping. Then run the finishing Path after tapping.
How to use
①Drill a prepared hole.
Contact
Please fill out the application sheet below and send it to bbcp@xebec-tech.co.jp
XEBEC Back Burr Cutter and Path
XEBEC Back Burr Cutter and Path completes accurate deburring of 3D-curved edge in a CNC machine in combination with the spherical deburring cutter and the custom-made tool path.
The tool path is custom-made in accordance with an edge profile, enabling uniform deburring amount while inhibiting secondary burrs.
XEBEC Back Burr Cutter
Long tool life thanks to the micro-grain cemented carbide. Applicable for difficult-to-cut material (e.g. titanium) as well as non-ferrous metals (e.g. aluminum) due to highly heat-resistant AlTiCrN coating.
The blade is designed to maximize cutting performance and to inhibit secondary burrs.
Please fill out the application sheet below and send it to bbcp@xebec-tech.co.jp